First Use; Checking The Saw Horses And Package Contents; Basic Cleaning; Use - Workzone FSH2P18 Manual Del Usuario

First use

First use

Checking the saw horses and package contents

NOTICE!
Risk of damage!
If you are not cautious when opening the packaging with a sharp
knife or other pointed object, you may damage the saw horses.
− For this reason, be very careful when opening them.
1. Take the saw horses out of the packaging.
2. Check to make sure that all parts are included (see Fig. A).
3. Check whether the saw horses or individual parts are damaged. If this is the
case, do not use the saw horses. Contact the manufacturer via the service
address indicated on the warranty card.

Basic cleaning

1. Remove the packaging material and all plastic wrappings.
2. Clean all parts of the saw horses before first use as described in the chapter
"Cleaning".

Use

CAUTION!

Risk of injury!

Improper setup and/or use of the saw horses may result in injury.
− Be careful of where you place your fingers and hands
while opening or closing the saw horses. You may
accidentally pinch your fingers and/or hands.
− Operate tools according to the manufacturers' instructions.
− For securing the object for sawing, clamps or a vise (not
− Always use the saw horses in pairs.
10
provided) should be adopted.