Cleaning; Storage - Workzone FSH2P18 Manual Del Usuario

1. Hold the legs
Slightly push the safety bars
(see Fig. B).
2. Flip up the edge holders
horses properly and place the object for sawing on the supporting bar
(see Fig. D).
To close the saw horses, reverse the steps above.

Cleaning

NOTICE!
Risk of damage!
Improper handling of the saw horses may result in damage to
the saw horses.
− Do not use any aggressive cleaners, brushes with metal or
nylon bristles, or sharp or metallic cleaning utensils such
as knives, hard scrapers and the like.
They could damage the surfaces.
1. Wipe the saw horses off with a damp cloth.
2. Let the saw horses dry completely.
You can now close the saw horses or continue to use them.

Storage

All parts must be completely dry before storage.
− Store the saw horses in a dry and clean area.
− Keep the saw horses away from children.
− Place the saw horses against a wall, or lay them flat on the ground.
− Store the saw horses in a location where they pose no danger of tripping or
obstruction.
− Prevent the saw horses from being used by unauthorized persons (e.g.
children).
4 and pull them outwards until they do not open further.
3
2 (see Fig. C). Align the two fully-opened saw
downwards until they become horizontal
Cleaning
1
11