General Safety Instructions - Workzone FSH2P18 Manual Del Usuario

Safety

General safety instructions

WARNING!
Risk of injury!
Failure to use the saw horses properly could result in injury.
− Warning: This product is not suitable for use with chainsaws.
− After purchase and before each use, check the condition
of the saw horses and that all parts are functional. Do not
use the saw horses if they are damaged.
− Do not exceed the load bearing capacity of the saw horses
of 750 lbs (340 kg), and evenly distribute the load across
two saw horses.
− Make sure that the saw horses are suitable for the intended
use.
− Make sure that the saw horses have been set up properly
and securely before you use them.
− Be careful of where you place your fingers and hands
while opening or closing the saw horses. You may
accidentally pinch your fingers and/or hands.
− Only wear tightly fitting clothing when you use the saw
horses.
− Do not overreach. Keep proper footing and balance at all
time.
− Operate tools according to the manufacturers'
instructions. For optimal protection, wear safety goggles,
heavy-duty gloves and steel toe boots during the work.
− Secure the work with clamps or a vise, freeing both hands
to operate the tool.
− Do not put loads on the saw horses which would protrude
laterally.
− Do not sit or stand on the saw horses.
8