Names Of Components - KPS PA50 MINI Manual De Funcionamiento

Earth (ground) terminal
1.4 Maintenance
• Do not attempt to remove the rear case to adjust or repair the meter. Such
actions should only be performed by a technician who fully understands the
meter and the danger involved.
• Before opening the case and battery cover of the meter, always disconnect
test leads from all sources of electric current. Disconnect the test leads from
all sources of electric current before opening the rear case and battery cover
of the meter.
• To avoid any electric shock caused by error readings, replace the batteries
immediately when the "
• Use damp cloth and mild detergent to clean the meter; do not use abrasives
or solvents.
• Turn the rotary selector to OFF position to switch off the power when the
meter is not in use.
• Remove the batteries to avoid damages to the meter if it will idle for a long
time.
2. DESCRIPTION
• The meter can perform measurements of AC/DC voltage and current, re-
sistance, frequency, duty, capacitance, as well as continuity and diode test.
• Both auto range and manual range are available.
• This meter is equipped with reading hold function.
• This meter is equipped with true root mean square value measuring function
(at AC A and AC V range).
• This meter is equipped with inrush current measuring function.
• This meter is equipped with auto zero function (at DCA range).
• This meter is equipped with maximum value measuring function.
• This meter is equipped with minimum value measuring function.
• This meter can measure frequency by clamp
• This meter has function of auto power off.

2.1 Names of components

(1) Current Clamp
KPS-PA50 MINI • Digital clamp meter
" sign appears on the display..
28