General Specifications - KPS PA50 MINI Manual De Funcionamiento

MAX
MIN
ZERO
TRMS
H
INRUSH
%
mV, V
A
μF, mF
Ω, kΩ, MΩ
Hz, kHz
3. SPECIFICATIONS
Calibration is required once a year, to be carried out at a temperature between
18°C and 28°C (64ºF to 82ºF) and relative humidity below 75%.

3.1 General specifications

• Auto range and manual range options are available.
• Overrange protection is provided for all ranges.
• Maximum voltage between terminals and earth ground: 600V DC or rms AC
• Operating altitude: max. 2000 meters (7000 ft.)
• Display: LCD
• Maximum value display: 6599 digits
• Polarity indication: automatic; '-' for negative polarity.
• Overrange indication: '0L' or '-0L'
• Sampling Time: approx. 0.4 second per sample
KPS-PA50 MINI • Digital clamp meter
The maximum value is being measured
The minimum value is being measured.
DCA zero
Auto power off
Battery low
True RMS
This indicates that the display data is being held.
Inrush current is being measured.
Percent (Duty cycle)
Milli-volts, Volts (Voltage)
Amperes (Current)
Micro-farad, Milli-farad (Capacitance)
Ohms, Kilo-ohms, Mega-ohms (Resistance)
Hertz, Kilo-hertz (Frequency)
32