Names Of Components - KPS -PA60 Manual De Funcionamiento

KPS-PA60 • Digital clamp meter
1.4 Maintenance
• Do not attempt to remove the rear case to adjust or repair the meter.
• Such actions should only be performed by a technician who fully under-
stands the meter and the danger involved.
• Before opening the case and battery cover of the meter, always disconnect
test leads from all sources of electric current. Disconnect the test leads from
all sources of electric current before opening the rear case and battery cover
of the meter.
• To avoid any electric shock caused by error readings, replace the batteries
immediately when the "
• Use damp cloth and mild detergent to clean the meter; do not use abrasives
or solvents.
• Turn the rotary selector to OFF position to switch off the power when the
meter is not in use.
• Remove the batteries to avoid damages to the meter if it will idle for a long
time.
2. DESCRIPTION
• This meter is a portable professional measuring instrument with LCD and
back light easily reading. The „single-hand operation‟ design for the range
switch makes measurement simple and easy. Overload protection and low
battery indication are provided. It is an ideal multi-function Instrument with
scores of practical applications for professional, workshop, school, hobby
and home use.
• The meter can perform measurements of AC/DC voltage and current, resis-
tance, frequency, duty, capacitance, as well as continuity and diode test auto
range is available.
• This meter is equipped with reading hold function.
• This meter is equipped with auto zero function (at DCA range).

2.1 Names of components

(1) Current Clamp
(2) Current Clamp
(3) Panel
(4) Trigger
" sign appears on the display.
27