Application Conditions - Grouw 18023 Manual De Instrucciones

PROTECT THE ENVIRONMENT
Take used oil to an authorized collection point or follow the
stipulations in the country where the log splitter is used.
Do not discharge into drains, soil or water.
MAINTAIN YOUR LOG SPLITTER WITH CARE
Keep the log splitter clean for best and safest performance.
MAKE THE WORKSHOP CHILDPROOF
Lock the shop. Disconnect master switches. Store the log splitter
away from children and others not quali� ed to use it.

APPLICATION CONDITIONS

This log splitter is a home use model. It
is designed for operating under ambient
temperatures between +5°C and 40°C and for
installation at altitudes no more than 1000m
above M.S.L. The surrounding humidity
should less than 50% at 40°C. It can be stored
or transported under ambient temperatures
between -25°C and 55°C.
SPECIFICATIONS
Model Number
Motor 230V~ / 50Hz, 1500W, S3, IP54
Log Capacity
Diameter
Length
Splitting Force
Hydraulic Pressure
Hydraulic Oil Capacity
Weight
The diameter of the log is indicative – a small
log can be diffi cult to split when it has knobs
or a particularly tough � ber. On the other
hand, it may not be diffi cult to split logs with
regular � bers even if its diameter exceeds the
max. � gure indicated above.
This is a Category 1 product, with the
earthing protection provided via the
Schuko plug.
A 16A fuse should be used.
18023
SET UP AND PREPARATION FOR
5 ~ 25cm
OPERATION
52cm
1. Bolt the Support Leg to the Log Splitter,
5 t
lift the log splitter by the handles at both
20Mpa
ends and place it on a 60 – 75cm high,
3.3L
stable, � at and level work surface.
65kg
2. Familiarize yourself with the controls
and features of this log splitter in the
illustrations.
GB
77