Grouw 18023 Manual De Instrucciones página 89

1. Attach the feed plate (1) to the body of
the log splitter and press it down gently.
Note that it will still slope upwards when
it is properly � tted.
2. Screw the left support plate (4) and the
right support plate (6) securely into the
welded nuts on the body's legs using the
bolts (10). Then screw the left support
plate (4) and the right support plate (6)
together using the connection piece (5)
and bolts (8) and nuts (7) with square
heads.
3. Fit the opening plate (2) and rear plate (3)
to the left support plate (4) and the right
support plate (6) using the � ttings with
square head.
4. Tighten all bolts, nuts and � ttings.
GB
89