Ducting Or Recirculation Fitting; Connection To Power Supply And Checking Of Good Working Order - Kuppersbusch KD 674.1GE Instrucciones De Uso Y De Montaje

Part 1 - INSTALLATION INSTRUCTIONS

4.4 - Ducting or recirculation fitting

1 - Ducting fitting.
This is possible for all forms of installation:
a) Connect the air outlet to the external ducting system.
b) Remove the activated charcoal filter (if there is one) inside the
hood canopy (see Maintenance).
2 - Recirculation fitting
This is only possible with the air outlet directed upwards. Fit the
venting grille G onto the air outlet (Fig. 25). The activated charcoal
filter should be fitted inside the hood canopy after connection to
the power supply.
4.5 - Connection to power supply and checking
of good working order
1 - It is absolutely necessary to follow
the warnings 3.2, 3.3 and 3.4 of
paragraph 3, concerning safety
measures.
2 - Loosen the two locking screws and
remove the metal cover (fig.26).
Connect the hood connection to the
engine connection (fig.27a).
Correctly place the connectors
under the cover and tighten the two
locking screws (fig. 27b).
3 - Once electrical connection has
been carried out, check that lights,
engine and change of speed work
4 - Fit the antigrease filters (paragraph
4.2) and the activated carbon filter
(only for filter mode) (see
Maintenance).
2 6
2 6
2 7
2 7
27b
2 5
2 5
A08_26
27a
A08_27