Advice On Disposal; Troubleshooting - Bosch Sensixx’x DI90 MotorSteam Instrucciones De Uso

advice on disposal
Our goods come in optimised packaging.
ℹ ℹ
This basically consists in using non-
contaminating materials which should be
handed over to the local waste disposal
service as secondary raw materials. Your
local town council can give you information
about how to dispose of obsolete
appliances.
This appliance is labelled in
accordance with European Directive
2012/19/EU concerning used
electrical and electronic appliances
(waste electrical and electronic
equipment -WEEE).
The guideline determines the framework for
the return and recycling of used appliances
as applicable throughout the EU.
Trouble shooting
problem probable cause
The iron does not 1. Temperature control (15) set to
heat up.
2. No mains supply.
3. The "SensorSteam" system has been
"SensorSteam" • The "SensorSteam" system has been
indicator lamp (3)
flashes.
The lights inside • The soleplate is heating up or cooling
the temperature
control (15) flash.
The clothes tend • The temperature is too high.
to stick.
minimum.
activated. The iron is set to stand-by.
activated. The iron is set to stand-by.
down to the selected temperature.
Solution
1. Turn to a higher position.
2. Check with another appliance or
plug the iron into a different socket.
3. Grip the handle (1) of the iron to
re-start it.
• Grip the handle (1) of the iron to
re-start it.
• This is normal and lights will stop
flashing when the selected
temperature is reached.
When the temperature selection is
changed from a higher to a lower
setting, the time needed is longer.
To speed up the cooling process,
you may press the shot of steam
button (6).
• Turn the temperature control (15)
down and wait until the iron has
cooled down.
23
BOS CH