Programming Radio Stations - Insignia NS-B2114 Guia Del Usuario

Insignia NS-B2114 CD Boombox with AM/FM Radio

Programming radio stations

You can program 10 FM and 10 AM stations into memory.
To program a radio station:
1 While the radio is playing, press the
boombox or remote control to select a radio station.
2 Press and hold the MEM/CLK ADJ button on your boombox or
the MEM/CLK SET button on your remote control. When P01
appears on the display, release the button.
3 Press the
control to select the number you want to assign to the station you
selected.
4 Press the MEM/CLK ADJ button on your boombox or the
MEM/CLK SET button on the remote control to save your setting.
5 Repeat Step 1 through Step 4 to program additional stations.
Listening to a programmed station
To listen to a programmed station:
• Press the
the
one or more times to select the number of the programmed
station you want to listen to. The number you assigned to the
station appears on the display.
Listening to a CD
Note
In addition to audio CDs, your boombox can play CD-Rs
and CD-RWs. A CD-R or CD-RW must be finalized before
you can play it.
To play a CD:
1 Make sure that your boombox is turned on.
2 Press the FUNCTION button on your boombox or remote control
to select CD. CD appears on the display.
or button on your boombox or remote
or REPEAT/M-DN button on your boombox or
or REPEAT/MEM DN button on your remote control
www.insignia-products.com
or button on your
19