Chicco Lullaby Manual Del Propietário página 30

Operate NiteLite Electronics
Para utilizar los componentes electrónicos NiteLite
23
With the switch in the MELODY ( ) or SOUND (
the following.
VOLUME: To increase the sound, press the
the sound, press the
VIBRATION: Push the VIBRATION
and it will automatically turn off in 10 minutes. To immediately stop the vibration
cycle, press the VIBRATION
button is pushed in the middle of the vibration cycle the light will turn off when
the vibration cycle ends.
LIGHT: Push the LIGHT ( ) button once to activate light cycle and it will
automatically turn off in 10 minutes. To immediately stop the light cycle, press
the LIGHT ( ) button again. Note: When the VIBRATON ( ) button is pushed in
the middle of the light cycle the vibration will turn off when the light cycle ends.
MUSIC/FAST FORWARD: Push the MUSIC/FAST FORWARD ( / ) button once,
it will move to the next melody/sound, play for the 10 minute cycle and stop. If you
press and hold down the MUSIC/FAST FORWARD ( / ) button for 2 seconds, it
will play the current melody/sound continuously for 5 minutes and stop.
30
23A. The Lullaby NiteLite has (3) modes:
SOUND: The SOUND (
nature sounds. The SOUND (
selection will cycle through 3 different
sounds for 10 minutes and go into
standby/sleep mode. MELODY: The
MELODY ( ) position (2) plays soothing
music. The MELODY ( )selection will cycle
through 5 different songs for 10 minutes
and go into standby/sleep mode. OFF: The
(OFF) position will turn OFF all electronics.
To prolong life of batteries, make sure the
power switch is in the OFF position when
not in use.
side of the button.
( )
( )
button again. Note: When the LIGHT
( )
(Select models)
) position you can activate
side of the button. To decrease
( )
button once to activate vibration cycle
(modelos selectos)
) position plays
)
( )