Attention; Introduction; Technical Data - Sagola PACK 6000X Manual De Instrucciones, Lista De Repuestos

Before starting up the equipment, please read,
take into account and follow all the recommenda-
tions described in this manual.
Keep it in a safe place that is accessible to all the
users of the equipment.
The equipment must only be started up and used
by personnel instructed in its operation and it must
exclusively be used for the intended purposes.
The equipment you have purchased and within
the SAGOLA product range, belongs to the family
of equipment used to project compressed air
through a spray gun or as an application tool.
The PACK 6000X AIR HEATER compressed air
equipment, in accordance with the set "default"
settings is suited for heating compressed air for
any industrial application.
With a maximum pressure of 7 bar of compressed
dry and clean air (based on the prior treatment of
the compressed air).
With a minimum consumption of 150 L/min. and a
maximum of 750 L/min.
Until it reaches a maximum temperature of 70ºC.
Higher temperatures, greater flow rates and
higher pressures can be attained following prior
consultation to SAGOLA S.A.
Nominal temperature range
Heat resistance of the materials
Input materials at the maximum
Minimum working air flow
Maximum working air flow at 7 bar
Disconnection by default
Thermal fuse
Maximum power
Power intensity fuse
Total estimated weight
Voltage
Frequency
Dimensions

1. ATTENTION

Similarly, the Accident prevention Standards, the
Workplace Regulations and Directives and the
current laws and restrictions, must be taken into
account.
SAGOLA S.A., the SAGOLA logos and other
SAGOLA products mentioned in this manual are
registered trademarks or brand names of the
SAGOLA S.A. company.

2. INTRODUCTION

One of its main applications is to supply the
compressed air used in painting processes at a
constant temperature, regardless of the environ-
mental conditions.
The use of this equipment provides an optimal
surface quality finish, whilst maintaining a constant
temperature in the compressed air, as required for
the application of certain types of products.
Factory line equipment comprised of:
- Air heater.
- Heated air hose.
- Instruction manual.
- Packaging.
Optional and supplementary components of the
equipment:
- Conventional anti-static air hose.
- Compressed air treatment equipment.
- Spray guns.

3. TECHNICAL DATA

- 16 -
from 20 O C to 70
220
7 bar
150 L/min.
750 L/min.
at 80
216
980 w
5 A
3.6 kg.
220-240 V
50-60 Hz
405 mm. 92 mm.
Height: Depth:
O C
C
O
O C
C
O
10 A
110-130 V
255 mm.
Width: