UFESA BS4700 Instrucciones De Uso página 6

ENGLISH
1. S topper
2. C over
3. J ug
4. S eal
5. B lade cone
6. M otor housing
7. Motor spindle
8. P ulse speed
9. Set speeds
10. Stop button
11. Nontslip feet
12. Cable coiler
IMPORTANT NOTES
• Read these instructions carefully before
using the appliance for the first time.
Safeguard them for future reference.
• Only connect it to the voltages stated
on the characteristics plate.
• This appliance is suitable for use with
foodstuffs.
• This appliance has been designed
exclusively for domestic use.
• Do not handle the appliance with wet
hands.
• Avoid contact with the moving parts
• The edge of the blade is very sharp.
To avoid injuries handle the blades with
extreme care when cleaning them.
• Never insert metal utensils, such as
knives or forks, into the inside of the jug
while the appliance is operating.
• The use of accessories not supplied by
the manufacturer may cause accidents.
• Do not operate the appliance without a
workload.
• Do not leave the appliance close to
heat sources nor allow the cable to come
into contact with hot surfaces.
• Do not operate the appliance with the
cable still coiled.
• Never try to fit or remove the jug on
the blander while the appliance is still
running.
• Do not leave the appliance operating
unattended, especially with children
about.
• This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use
of the appliance by a person responsible
for their safety.
• Children should be supervised to
ensure that they do not play with the
appliance.
• The apliance is not intended to be
operated by means of an external timer
or separate remotetcontrol system.
• Unplug the appliance from the mains
when it is not in use
• Do not unplug it by pulling on the
cable, nor leave the plug hanging freely..
• Make sure that the appliance is
unplugged before cleaning it.
• DO NOT IMMERSE THE MOTOR
HOUSING INTO WATER OR ANY OTHER
LIQUID.
• Do not switch the appliance on if the
cable or the plug are damaged or if it
can be detected that the appliance is not
working correctly
• Never use the appliance outdoors
• ATTENTION: To reduce the risk of fire
or electric shock, never remove any of
the covers. There are no user serviceable
parts on the inside. Cable repairs and
replacements must be carried out
exclusively by an Authorised Technical
Service Centre.
To reduce the risk of fire or electric shock,
never remove any of the covers. There are
no user serviceable parts on the inside.
If cable is damaged, it must be repaired
and replaced by an Authorised Technical
Service Centre.
ASSEMBLY
Before its first use, use soapy water to
wash all the pieces which are going to
come into contact with foodstuffs.
1. Fitting the blades: Check that the seal
is fitted correctly. Place the blade cone
onto the base of the jug and turn it in a
clockwise direction to lock it (fig. 1). The
pictures on the cone show you which
way to turn it:
t ( ) Remove
t ( ) and (> CLOSE>) to attach it.
2. Fitting the jug: Place the jug onto the
motor housing, seating the lugs on the
blade cone into the holes on the motor
spindle. Turn the jug in an antitclockwise
direction so that the holding lugs on the
jug lock into their slots, leaving the jug
securely attached (fig. 2).
3. Fitting the lid: Line up the lugs on the
mouth of the jug with the holes on the lid
(fig. 3) and rotate the lid gently until the
lugs are fully home.