4
5
6
DEF.
A.PROC
60
R–MX ON
R–MX
1
Using Dolby Surround
Mixing the rear audio
channels (Continued)
Within 5 seconds, use the " " or " " key to
switch the mode.
Press " " to set the off mode.
Press " " to set the on mode.
Note: The off mode is set automatically when
the rear speakers are set to the off mode.
Within 5 seconds, use the " " or " " key to
adjust the level.
The level can be adjusted between –2 and +2.
The higher the value, the greater the bass
sound output from the rear speakers.
(The effect differs from source to source.)
To quit, press "A.PROC".
English