Delete A Keyfob; Delete All Keyfobs; Change Keyfob Buttons That Controls The Outputs - RISCO Group LightSYS Manual De Usuario

Funciones y Configuraciones de Usuario

Delete a keyfob

1. Follow steps 1-3 of the previous procedure (See Assign New Keyfob)
2. Using the arrow keys, scroll to the Delete Keyfob option and press
3. Press the
4. Press the keyfob
5. Repeat step 6 for additional keyfobs. When finished press

Delete All keyfobs

1. Follow steps 1-3 of the previous procedure (See Assign New Keyfob)
2. Using the arrow keys, scroll to the Delete All Keyfobs option and press
3. Use the key to toggle to Y and press

Change keyfob buttons that controls the outputs

By default, button 3 (small round key) of the keyfob controls output 1 and button 4 (egg
shape) controls output 2. This can be changed for all the keyfobs that are already assigned
to the wireless receiver.
1. Follow steps 1-3 of the previous procedure (See Assign New Keyfob)
2. Using the arrow keys, scroll to the UO Buttons option and press
3. Use the key to toggle to Y and press
and button 4 to button 2.
Manual de Usuario de Agility
key to start the keyfob Erase mode.
key for 3 seconds.
.
. This will replace button 3 to button 1
Page 42
.
to exit Erase mode
.
.