Grouw 50799 Manual De Instrucciones página 58

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 98
Overview
1. Removable support rail
2. Cradle
3. Motor
4. Inner screen
5. Outer screen
6. Leg
7. Spanners (2)
8. On/off button
9. Adjustable length stop
10. Movable plate
11. Lock knob
12. Screen over cradle
58
Sawing
Note! The saw requires a connection to a
plug with a 16-Ampere fuse.
If an extension lead is used, the lead must
have a 2.5 mm
cross-section and be fully
2
uncoiled before use. Make sure that the cord
will not be squeezed or come into contact
with the saw during work.
Plug the in.
Place the workpiece to be cut in the cradle so
the part to be sawed is in line with the blade.
If necessary, use the length stop so that all
the logs are sawn to the same length.

Publicidad

Tabla de contenido
loading

Productos relacionados para Grouw 50799

Tabla de contenido