Cleaning And Maintenance - Grouw 50799 Manual De Instrucciones

Step 4
Hold the outer � ange tightly and loosen the
nut using the two spanners provided.
Carefully loosen the nut on the motor
spindle, remove the outer � ange and lift the
saw blade off carefully. Please note that the
blade is very heavy. Take care when undoing
the nut and removing the blade, as it can
cause serious injury.
Clean the blade guard, spindle and � anges,
� t a new blade and secure it and the outer
� ange by means of the nut.
Check that the blade teeth are facing in the
correct direction.
Step 5
Fit all the parts again and check that the
closure mechanism is functioning correctly.
60

Cleaning and maintenance

Remove sawdust and dirt using a vacuum
cleaner, compressed air or a brush. Check
that the motor ventilation slots are not
blocked.
The saw can be cleaned by wiping its exterior
parts with a damp cloth.
Lubricate the moving parts with oil from time
to time. In the event of prolonged storage,
we recommend lubricating the saw blade
and the spring rod with oil to prevent rust.
Never use strong or corrosive detergents on
the log saw. They can damage the parts of
the saw and aff ect its function.
Cover the saw with a tarpaulin if it is
outdoors and ensure that the motor and
on/off button are protected against water.