Bosch WEU PLL 2 Manual Original página 27

OBJ_BUCH-2030-005.book Page 27 Friday, September 2, 2016 4:30 PM
Indication Mode
Cross-line mode. The measuring tool is tilted to the left.*
Cross-line mode. The measuring tool is tilted to the right.*
Digital spirit level. The measuring tool checks horizontal
or vertical like a spirit level. Laser lines are not projected.
Digital spirit level. The measuring tool is tilted to the left.
The smallest indicated angle is 0.1 °.
Digital spirit level. The measuring tool is tilted to the
right.
The smallest indicated angle is 0.1 °.
The tilt angle of ±10 ° forwards (in the direction of the la-
ser) or backwards (in the direction of the display) is ex-
ceeded (display flashes). The laser line goes out.
*Tilt angle h and laser lines are only indicated from an incline of >2°.
Additional displays:
Indication Description
The measuring tool starts.
When no button on the measuring tool is pressed for approx. 30 minutes,
the measuring tool automatically switches off to save the batteries.
Bosch Power Tools
The calibration is active (display flashes).
The calibration is completed.
1 609 92A 27M | (2.9.16)
English | 27