Disposal; Declaration Of Conformity - Klarstein 10028189 Manual De Usuario

Protection Functions
Frost Protection Function:
In cooling, dehumidifi cation or economic power saving mode, if the temperature of the exhaust pipe
is too low, the machine will automatically enter protection status; if the temperature of the exhaust
pipe rises to a certain temperature, it can automatically revert to normal operation.
Overfl ow Protection Function:
When water in the water pan exceeds the warning level, the machine will automatically sound an
alarm, and the LDC temperature display area will show „FL". At this point, you need to move the
drainage pipe connecting the machine or the water outlet to sewer or other drainage area to empty
the water (details see Drainage Instructions at the end of this chapter). After the water is emptied,
the machine will automatically return to the original state.
Protection Function of the Compressor:
To increase the service life of the compressor, it has a 3-minute delay booting protection function
after the compressor is turned off .
According to the European waste regulation 2012/19/EU this symbol on the
product or on its packaging indicates that this product may not be treated as
household waste. Instead it should be taken to the appropriate collection point for
the recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed information about recycling of this
product, please contact your local council or your household waste disposal service.
Your product contains batteries covered by the European Directive. 2006/66/EC, which cannot be
disposed of with normal household waste. Please check local rules on separate collection of batteries.
The correct disposal of batteries helps prevent potentially negative consequences on the environment
and human health.

Declaration of Conformity

Producer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin
This product is conform to the following European Directives:
2012/206/EU (ErP)
2014/30/EU (EMC)
2014/35/EU (LVD)
2011/65/EU (RoHS)

Disposal

22