Klarstein 10031979 Manual Del Usuario página 24

EN
24
Child-lock setting
Press and hold both arrow buttons (14, 15) for three seconds. The child lock indicator
([ ]) appears on the display. The system is locked and no settings can be made. After
three seconds, the display shows the ambient temperature.
Methods to unlock: Press and hold the two arrow buttons (14, 15) for 3 seconds. The unit
is unlocked. Now any settings can be made again.
Display buttons activation
The display buttons normally go off during operation. Touch the panel area below the
temperature display to activate the display buttons.
ECO function (economy mode)
Press and hold the setting button (16) and the arrow down button (14) for three seconds
(or press the ECO button (19) on the remote control) to put the unit into economy mode.
In this operating mode, the display will show only a few indicators (depending on the
settings you made before ECO mode).
Methods to lock the ECO function:
1 Press any button on the display.
2 Press the ECO button (19) on the remote control.
Sleep mode
If no button is pressed for 10 seconds while the unit is heating, the display goes to sleep
mode and shows only the ambient temperature.
Open-window detection
If the ambient temperature decreases 3 °C or more within 2 minutes, the heating
activates open window detection. The symbol
sounds. The heating switches itself off.
Day/week timer shifting
Press the "W/24H" button to shift between the day timer and week timer settings. The
display will show "Day Timer" and "Week Timer" accordingly.
• Day timer: With this setting, "Day Timer" appears on the display. Press the setting
button (16, or 18 on the remote control) to set the hour. Use the arrow buttons (14,
15) to select an hour. Press the setting button (16) to switch to the minutes setting.
Use the arrow buttons (14, 15) to set the minutes. Confirm with the OK button (22)
and save the settings you have made.
appears in the display and a buzzer