CARE AND MAINTENANCE
• To maintain optimum performance of this air purifi er, please clean the product including
the fi lter periodically.
MAIN UNIT
BACK PANEL
Back Panel
NOTE How to clean hard to remove dirt
Back Panel
HEPA FILTER
Tag
Wipe with a dry, soft cloth.
For stubborn stains or dirt, use a soft cloth dampened with warm water.
NOTE
Do not use volatile fl uids.
•
Benzine, paint thinner, polishing powder, etc. , may damage the surface.
Do not use detergents.
•
Detergent ingredients may damage the product.
(Pre-Filter)
Gently remove dust from the Back Panel, using a vacuum
cleaner attachment or similar tool.
NOTE
Do not apply excessive pressure, when scrubbing the Back
Panel.
1. Add a small amount of kitchen detergent to water
and soak for about 10 minutes.
2. Rinse off the kitchen detergent with clean water.
3. Completely dry the fi lter in a well-ventilated area.
Gently remove dust from the HEPA Filter with a vacuum
cleaner attachment or similar tool.
NOTE
• Do not WASH in water and DRY in the sunlight.
• Perform maintenance only on the side with the tag.
Do not clean the opposite side; otherwise, the fi lter will be
damaged.
The fi lter is fragile, be careful not to apply too much force.
EN-8
Always be sure to remove the
power plug from the wall outlet.