Hamilton Beach 40715 Manual Del Usuario página 8

How to Steam Milk
1
Ensure there is water in the removable
water reservoir and move the frothing
nozzle to the right of the unit.
5
Fill a metal or ceramic cup 1/3 full with
cold milk. A stainless steel cup and skim
milk are recommended.
8
w WARNING
2
Plug unit in; press ON/OFF button to begin
heating water. When heated, the light next
to temperature selection button will glow.
6
Hold cup underneath frothing nozzle,
leaving about 1/4 to 1/2 inch between
the nozzle and the bottom of the cup.
Burn Hazard. Vapor and water emitted from frothing nozzle are hot.
3
Press the temperature selection button.
7
Turn steam control dial counterclockwise
to open steam valve. Milk is steamed
when cup becomes warm. NOTE: After
each time steaming and to prevent clog-
ging nozzle, hold a cup with water under
nozzle and "steam" into the cup to clean.
4
Turn the steam control dial to NO STEAM
position .
8
Turn steam control dial to NO STEAM
Press ON/OFF button (light will go out);
then press temperature selection button
again to turn off steam temperature.
Unplug unit from outlet. Clean the frothing
nozzle after each use.
.