How To Froth Milk - Hamilton Beach 40715 Manual Del Usuario

How to Froth Milk

1
Ensure there is water in the removable
water reservoir and move the frothing
nozzle to the right of the unit.
5
Fill a metal or ceramic cup 1/3 full with
cold milk. A stainless steel cup and skim
milk are recommended.
2
Plug unit in; press ON/OFF button to begin
heating water. When heated, the light next
to temperature selection button will glow.
6
Hold cup underneath frothing nozzle, leaving about 1/4 to 1/2 inch between the nozzle
and the bottom of the cup. Rotate steam control dial about 3/4 turn toward steam. Hold
cup under frothing nozzle until desired consistency is reached. Froth should be stiff and
scoopable with a spoon.
3
Press the temperature selection button.
7
4
Turn the steam control dial clockwise to
NO STEAM .
8
Turn steam control dial to NO STEAM
Press ON/OFF button (light will go out);
then press temperature selection button
again to turn off steam temperature.
Unplug unit from outlet. Clean the frothing
nozzle after each use.
.
9