Sending Measurement Results To Wireless Receivers - Seca 635 Manual De Instrucciones Y Garantía

BMI
Below 18.5
Between 18.5 and
24.9
Between 25 and 30
(incipient obesity)
Over 30
Sending measurement
results to wireless
receivers
7. Confirm your setting with Enter (send/print).
The height entered is saved and will be available
again for the next BMI calculation.
NOTE
Make a note of the memory number so that you
can call up this height for another BMI calcula-
tion.
8. Weigh the patient as described in the section
entitled "Weighing a patient".
The patient's BMI is automatically calculated and
displayed.
9. Read off the BMI and compare it with the
categories quoted further down.
10. To deactivate the BMI function, briefly press the
Enter key (send/print).
Patient is underweight. There could be anorexic tendencies.
Weight should be increased to improve well-being and perfor-
mance. If in doubt, seek the advice of a consultant.
The patient's weight is normal.
The patient is slightly to moderately overweight. He or she
should lose weight if already suffering from a disease such as
diabetes, high blood pressure, gout or disorders of fat metab-
olism.
Weight needs to be lost urgently. The metabolism, the circula-
tory system and the bones are all under strain. A strict diet,
lots of physical activity and behavioral training are all recom-
mended. If in doubt, seek the advice of a consultant.
If the scale is integrated in a
work, you can send the measurement results to
devices ready to receive them (e.g. wireless printer, PC
with USB wireless adapter) at the touch of a button.
Press the Enter key (send/print).
– Press key briefly: send measurement results
to all devices ready to receive them
– Press and hold key: print out measurement
result on wireless printer
Rating
seca 360° wireless
Operation • 79
English
net-