Graf KLARO Easy Instrucciones Para El Montaje página 36

5.3 Assembling the disc diffusers
The stainless steel pipes for ventilation are
to be assembled in the tank according to
their installation size in line with the
drawings below.
All connections are to be sealed using
Teflon tape. Finally, the concrete weight
supplied is to be placed on to the downpipe.
300
Assembly of the 2nd disc diffuser
5.4 Connecting the holding plate and the lifters in the SBR basin
The lifters are then clamped to the holding plate. In
doing so, the excess sludge lifter (J) is mounted on
the left (short) side and the clear water extraction
lifter (I) is mounted on the right (long) side of the
holding plate.
5. Installation of the setting-up kit
Downpipe
300
34 / 92
All connections are to
be sealed using Teflon
tape!
Assembly of the disc diffusers (1st disc diffuser)
500
Assembly of the 3rd disc diffuser
J
Disc diffuser
Tighten the
plastic thread
hand-tight
500
I