Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
PROGRAMMABLE FUCTIONS TO ADAPT TO THE TYPE OF INSTALLATION
SETTING OF THE TEMPERATURE SCALE
The thermostat is preset in production for viewing the tempera-
tures in centigrades, it is possible however to change to the
Farenheit scale or viceversa with the following procedure:
ADJUSTMENT OF ROOM TEMPERATURE READING
If for any reason the thermostat is installed in a position for
which the measured temperature might be influenced (eg. an
external wall which in the winter is on average colder that the
rest of the house) it is possible to set an Offset (adjustment
reading) of the measured temperature, the adjustment which
Press the
or
key to
can be set is from
change the current
setting.
Press the
OK
key to move
to the following setting or
keep it pressed for at least
4 seconds to save the new
setting and exit the
program menu.
Note: upon return to regular functioning of the
thermostat, the effected adjustment of the room
temperature will be operative after a few seconds.
2 °C
to
+2 °C
or from
-3.6
to
+3.6 °F.
Press the
change current Setting.
Press the
move on to the following
setting or keep it pressed
for at least 4 seconds to
save the new setting and
exit the program menu.
GB
or
key to
OK
key to
31
Publicidad
Tabla de contenido
