Important - Perry TE530-1 Manual Del Usuario

GB FUNZIONI PROGRAMMABILI DI ADATTAMENTO AL TIPO DI IMPIANTO PROGRAMMABLE FUCTIONS TO ADAPT TO THE TYPE OF INSTALLATION
ACCESS TO PROGRAMMING
It is preferable that programming is accessed by the
installer or expert user
default settings could compromise the correct function
of the installation.
T
Set
30
since changing some of the
4 sec
Keep the Mode hey
pressed for 4 seconds .
SET PROG. will appear
on the display for a few
seconds.
Then, the thermostat
displays the measure
unit set page.
In the program menu you access the various functions
impulse pressing the Mode key, these being in sequence:
- Set scale of temperatures (°C or °F)
- Ad just measured room temperature (
- Block temperature set
- Select temperature regulation mode:
(DIFFERENTIAL ON/OFF or PROPORTIONAL)
- Change hysteresis set readings
(Proportional)
- Change set time cycle
- Exclude or seti antifreeze temperature

IMPORTANT:

to exit the Programs menu including any
new settings, confirm by pressing OK as follows:
Press OK for 4 seconds or wait 60 seconds (time-out)
the thermostat returns to normal operation.
OFFSET )
(Differential on/off)
Press Mode key one or
more times to pass from
one function to another.
;