Canopy Installation - Maxx Cold MXDC-4 Manual De Operación, Instalación Y Mantenimiento

CANOPY INSTALLATION:

Installation Steps:
1.Use self-tapping nails to fix front limit
holder on front of the top frame. Fix
retaining clip on both sides of the top
frame, and the fastening bolt hole on clip
faces inside.
2.Insert the bottom of side glass cover to
the retaining clip, to the end. Make
adjustment to ensure the side glass cover
having a 10mm clearance to the front
limit holder, then screwing down the
fastening bolt.
3.Place the rubber on the front of side
glass cover.
4.Put on the front glass cover, fix the
bottom in the front limit holder. The
camber surface fits both side glass covers
and both sides align to side glass covers.
5.Put on top limit holder and top glass
cover. Make the holder catch the front
cover, then putting top cover on the
holder. Use rectangular support and flat
head bolts to fix the holder and cover.
6.Option (if the product has middle
board): Use flat head bolt (with gasket) to
fix glass clamp element on side glass
covers. Push the board gently in the glass
clamp and screw down bolts to clamp the
Board.
8