Battery Low - Philips QT4015 Manual De Usuario

Ocultar thumbs Ver también para QT4015:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 13
English
6
Charging
Charge the appliance fully before you use it for the
first time.
It takes approximately 1 hour to fully charge the
appliance.
When it is fully charged, the appliance has a cordless
operating time of up to 60 minutes.
Note: You can use the appliance cordless as well as
connected to the mains.
1
Make sure the appliance is switched off.
2
Insert the appliance plug into the appliance.
3
Put the adapter in the wall socket.
, The charging light starts to flash green to
indicate that the appliance is charging.
, When the battery is fully charged, the charging
light lights up green continuously.
After 30 minutes, the charging light goes out.
4
After charging, remove the adapter from the
wall socket and pull the appliance plug out of
the appliance.

Battery low

When the battery is almost empty (when there are
only 5 or fewer trimming minutes left), the charging
light flashes orange.
optimising the lifetime of the rechargeable
battery
When you have charged the appliance for the first
time, we advise you to use it until the battery is
completely empty. Continue to use the appliance
until the motor almost stops running during a
session. Then recharge the battery. Follow this
procedure at least twice a year.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Qt4015/16Qt4014Qt4013Qt4011

Tabla de contenido