Battery Low; Travel Lock - Philips RQ1180 Manual Del Usuario

Ocultar thumbs Ver también para RQ1180:
Tabla de contenido

Publicidad

The three shaver types (RQ1180, RQ1160 and RQ1150) have different displays, which are shown in the figures below.
-
RQ1180 (Fig. 4)
-
RQ1160 (Fig. 5)
-
RQ1150 (Fig. 6)
charging
-
Charging takes approx. 1 hour.
RQ1180
-
When the shaver is charging, first the bottom charging light flashes, then the second charging light, and so on until the shaver is fully
charged (Fig. 7).
-
Quick charge: When the shaver contains enough energy for one shave, the bottom charging light alternately flashes orange and white.
RQ1160/RQ1150
-
When the shaver is charging, the battery symbol flashes until the shaver is fully charged. (Fig. 8)
-
Quick charge: When the shaver contains enough energy for one shave, the plug symbol and battery symbol flash alternately.
Note: The displays of types RQ1160 and RQ1150 look different, but work in the same way.
Battery fully charged
RQ1180
-
When the battery is fully charged, all charging lights light up continuously. After approx. 30 minutes the display automatically switches off
again. (Fig. 9)
RQ1160/RQ1150
-
When the battery is fully charged, the battery symbol lights up continuously. After approx. 30 minutes the display automatically switches off
again. (Fig. 10)
Note: The displays of types RQ1160 and RQ1150 look different, but work in the same way.

Battery low

RQ1180
-
When the battery is almost empty (when there are only 5 or fewer shaving minutes left), the bottom charging light flashes orange. (Fig. 11)
-
When you switch off the shaver, the bottom charging light continues to flash for a few seconds.
RQ1160/RQ1150
-
When the battery is almost empty (when there are only 5 or fewer shaving minutes left), the plug symbol flashes (Fig. 12).
-
When you switch off the shaver, the plug symbol continues to flash for a few seconds.
Note: The displays of types RQ1160 and RQ1150 look different, but work in the same way.
Remaining battery capacity
RQ1180
-
The remaining battery capacity is indicated by the number of charging lights that are on. (Fig. 13)

travel lock

You can lock the shaver when you are going to travel. The travel lock prevents the shaver from being switched on by accident.
activating the travel lock
1
Press the on/off button for 3 seconds to enter the travel lock mode (Fig. 14).
The lock symbol lights up on the display. -tekening- (Fig. 15)
,
Note: The displays of types RQ1180, RQ1160 and RQ1150 look different, but show the same symbol.
Deactivating the travel lock
1
Press the on/off button for 3 seconds.
The motor starts running to indicate that the travel lock has been deactivated.
,
The shaver is now ready for use again.
Note: When you place the shaver in the plugged-in charger or Jet Clean System, the travel lock is automatically deactivated.
charging
Charging takes approx. 1 hour.
RQ1180/RQ1160: A fully charged shaver has a shaving time of up to 50 minutes/15 days.
RQ1150: A fully charged shaver has a shaving time of up to 40 minutes/12 days.
Charge the shaver before you use it for the first time and when the display indicates that the battery is almost empty (see section 'Battery low'
in chapter 'The display').
Quick charge
After the shaver has charged for 5 minutes, it contains enough energy for one shave.
charging in the charger
1
Put the small plug in the charger (Fig. 16).
2
Put the adapter in the wall socket.
3
Put the shaver in the charger (1) and push it backwards (2) ('click'). (Fig. 17)
The display shows that the shaver is charging (see chapter 'The display').
,
charging in the Jet clean system (specific types only)
1
Put the small plug in the Jet Clean System.
English
7

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Rq1160Rq1150Rq 1150/16Rq 1160/21

Tabla de contenido