Exchange Of Fuses; General Advice; Care And Maintenance - Dreve Drufosmart Instrucciones De Trabajo

Drufosmart

10. Exchange of fuses

Disconnect the unit from mains sup-
ply. The fuse carrier is situated at the
rear of the unit, integrated in the mains
supply.
In order to control or exchange the
fuses push the push catch of the car-
rier, keep it pressed and remove the
carrier from the unit.
Pull the defective fuse out of the clamp
carrier applying slight traction and
replace it by a new, equivalent one.
Important: Only use the fuse
strength indicated on the rear.
34
After exchanging the fuse insert the
fuse carrier into the housing applying
slight pressure until the fixation latches
noticeably.

11. General advice

Repairs on the Drufosmart units may · the unit is operated in accordance with
only be executed by experts. Disconnect these working instructions.
the unit from mains supply at any rate. · extensions, new adjustments, changes
Dreve company is only responsible for or repairs are executed by persons
the safety, reliability and performance authorised by the company.
of the unit, if:
As we are currently developing our prod-
· the unit is exclusively used for the cor- ucts, we reserve the right for technical
responding field of application. changes.
· operation is only carried out by accord-
ingly trained personnel.

12. Care and maintenance

Generally disconnect the unit from with a slightly humid sponge and a mild
mains supply before executing care cleaning liquid. Water and cleaning li-
and maintenance. quids must not get into the unit.
Ideally cleaning is to be effected dryly The O-rings should be greased regularly
with a soft piece of cloth, if necessary with silicone grease.
35