7
EXTRACTABLE CUSHION
All three models are equipped with an extractable cushion (7) on the
upper part of the back, allowing the Client to enjoy an optimal comfort
during massages or leg peeling operations.
To extract the cushion, just pull it outbound.
Once the operations are over, please remember to place back the cushion
into its seat (8).
THERMO BLANKETS (OPTIONAL)
8
All three beds can be equipped, as an optional device, with 2 thermo
blankets situated underneath the bed covering (between the covering and
the foam-rubber).
Thanks to blankets Clientʼs skin doesnʼt keep in touch with the cold bedʼ
sky and help bettering the blood circulation because of the lymphatic
drainage easing and relaxing.
10
Warm blankets act to obtain a better distribution of the product.
11
9
The thermostat managing the two thermoblankets, allows two different
settings:
(9) – Switch set to 1/2 – Thermoblankets temperature of about 30÷35 °C
(10) –Switch set to MAX - Thermoblankets temperature of about 40÷45 °C
(11) – Switch set to 0 – Thermostat switched off
13
INSTALLING ARMS (OPTIONAL)
To install the arms it is necessary to insert the 2 stems of each arm(12)
inside the corresponding slots (13) situated on both sides of the bed.
Each arm has a specific direction and is not interchangeable with the other.
The arms have a hinge that allows them to bend and adapt according to
12
the back inclination.
Assembling must be carried out bearing in mind that when the arm is
bent, its shorter part must be positioned toward the leg-support, while the
longer one toward the back.
It is absolutely prohibited to sit on the arms. There is a risk of breaking them.
21