Nilo SPA MET Manual De Empleo página 26

MAINTENANCE
SECURITY PRESCRIPTIONS
Before any maintenance intervention on the equipment, please make sure that:
1 – the equipment has been switched off (main switch set on OFF)
2 – the plug has been disconnected from the outlet (extract the plug without pulling the
cable).
3 – Make sure the outlet has a ground connection.
Furthermore:
4 - DO NOT remove identification and safety labels placed on the back and inside the
equipment.
Should they become unreadable, please ask the supplier to substitute them.
5- in case of substitution of components, always submit the request to the supplier giving
name and code shown at the end of this manual.
6 – ONLY authorized and specialized technicians from NILO s.r.l., can intervene on extraor-
dinary maintenance on the equipment (interventions carried out by non authorized staff
immediately VOID the guarantee and Manufacturerʼs liability).
Should the main cable be damaged, it has to be replaced with a special cable
available at the Manufacturer, requesting it through the technical assistance
department.
CONNECTORS
Before any intervention on electric motors, make sure the main switchboard is unplugged
from the corresponding connectors (using a screwdriver, dismount the plastic cover that
wraps the main switchboard, placed in the lower part of the bed.)
(A) - Auxiliary connector
(B) – Keyboard Connector
(C) – Back acting connector
(D) – Leg support acting connector
(E) – Backside column acting connector
(F) – Frontside column acting connector
23