Nilo SPA MET Manual De Empleo página 25

14
16
17
17
22
INSTALLING HEAD-SUPPORT AND ELBOW-SUPPORT
15
(OPTIONALS)
To install the headrest (14) it is necessary to insert the two stems inside
the corresponding slots.
The elbow support (15) can be installed only along with the head-support:
in fact it is necessary to anchor it to the headrest.
To install the headrest and the elbow support is also possible to use a
support (16) that allows their use at a lower height than the bed planar.
Both the headrest and the elbow support are equipped with a block/un-
block device (17) that allows to modify their inclination to always grant
an optimal comfort during aestethic treatment.
It is absolutely prohibited to sit on the headrest, nor on the
elbow support. Maximum weight allowed is 30 kg.