ASSEMBLY
EN
The cabin must be assembled in its entirety. Any part not fully assembled could be severely damaged if
left as such. Do not tilt or push the cabin during construction.
Follow the instructions carefully, step by step.
Complete each step before starting the next. The garden shed must be assembled by two people.
Recommendations:
- In order to ensure proper assembly and to avoid splintering of the wooden parts, we recommend pre-dril-
ling with a screwdriver.
- Make sure to screw into wood of sufficient thickness to avoid splinters and visible screw tips.
- During assembly take care to sand away the inevitable imperfections (splinters, knots, wood fluff) present
due to the nature of wood as a material.
- Despite inspections, splinters may remain on some pieces of wood. Be sure to wear gloves.
TOOLS AND MATERIALS NEEDED
•
Stepladder
•
Drill - screwdriver
•
Wood drill bit diam. 4
•
Spirit level
•
Tape measure (3m)
•
Aluminium ruler
32
•
Set square
•
Box cutter
•
Hammer
•
Gloves
•
Shovel, rake etc.
•
Clamp
Time required:
a day
2 people
30/09/2019