Using the Phone Menus
2. Add New
Pairing is the process that allows the handset to locate, establish and register a
1-to-1 connection with the target device.
Pairing a new Bluetooth
1
Touch
> Bluetooth > Add > Start.
2
Follow the Bluetooth
®
3
If Bluetooth
Yes.
4
The device will appear on the screen once it has been located. Touch the
device name.
5
The phone may prompt you for the passkey. Consult the Bluetooth
instructions for the appropriate passkey (typically "0000" - 4 zeroes). Enter the
passkey and touch OK. Or it may prompt you to confirm matching passkeys on
both handsets.
6
Once pairing is successful, you will be asked to choose Always Ask or Always
Connect. This sets connection preferences for the Paired Device.
7
Once connected, you will see the device listed in the Paired Devices menu.
3. Paired Devices
Allows you to view the list of paired devices with your phone.
1
Touch
> Bluetooth and your Paired Devices list will display.
68
®
device
®
accessory instructions to set the device to pairing mode.
power is set to off, you will be prompted to turn power on. Touch
®
accessory