Mode Selection - Beko CEG5311X Manual Del Usario

4
Operation

4.7 Mode Selection

The machine has two different setting: default setting, ECO mode and speed mode. In ECO mode, the
appliance helps to save more energy. In speed mode, the user can make their coffee faster than in
default setting.
Illumination Light
Pre-brewing*
Auto shut off time
Cup Volume memory
The pre-brewing function moistens the grounded beans in the brewer with a small amount of
water before full extraction. This expands the coffee grounds to build up a greater pressure in
the brewer which help extraction of all the oils and full flavor from the grounded beans.
1. When the machine is in standby condition, press and holds the
2. The will then be flashing and the following button will have the following indications for different
settings:
In ECO Mode
In Speed Mode
In Default Setting
3. Press the hot water button for ECO mode, strong espresso button for speed mode and mild espresso
button for default setting. Two Beep sound will be heard indicates that the mode is being selected.
(Note: If you are pressing the relative lights on button for each mode, the machine will not response).
4. If you would like to remain the setting unchanged, press
machine to return to the standby condition
Fully Automatic Coffee Machine / User Manual
ECO Mode
No
Yes
10mins
Yes
Hot water button
Lights ON
Yes
Flashing
Speed Mode
Yes
No
30mins
Yes
for 5 seconds.
Strong espresso button
Flashing
No
Flashing
again or wait for 5 seconds for the
Default Setting
Yes
Yes
20mins
Yes
Mild espresso button
Flashing
Flashing
Lights On
15 / EN