Name And Functions Of Each Part - Sony HANDYCAM HDR-CX12 Guía De Operaciónes

Name and functions of each part

Buttons, jacks, etc., which are not explained
in other chapters, are explained here.
Handycam Station
US
1
Recording/Playback
 Power zoom lever
Move the power zoom lever slightly for
a slower zoom. Move it further for a
faster zoom.
You can magnify still images from
about 1.1 to 5 times the original size
(Playback zoom).
When you touch the screen during playback

zoom, the point you touched will be
displayed in the center of the LCD screen.
 Hook for a shoulder belt
Attach the shoulder belt (optional).
 Remote sensor/Infrared port
Receives the signal from the Remote
Commander.
 Built-in microphone
Sound picked up by the internal
microphone is converted to 5.1ch
surround sound and recorded.
 Camera recording lamp
The camera recording lamp lights up in
red during recording. The lamp flashes
when the remaining media capacity or
battery power is low.
 DISP/BATT INFO button
You can switch the screen display when
you press while the power is set to on.
When you press while the POWER
switch is set to OFF (CHG), you can
check the remaining battery.
  (back light) button
Press  (back light) to display  for
adjusting the exposure for backlit
subject. Press  (back light) again to
cancel the backlight function.
 Zoom buttons
Press for zooming in/out.
You can magnify still images from
about 1.1 to 5 times the original size
(Playback zoom).
When you touch the screen during playback

zoom, the point you touched will be
displayed in the center of the LCD screen.