JENN-AIR JXT9030CDP Manual De Instrucciones página 5

LIGHTS
Replacing Light Bulbs
CAUTION: Light bulb becomes extremely hot when turned on.
DO NOT touch bulb until switched off and cooled. Touching hot
Make sure all power is turned off and
bulbs are not hot.
Remove by turning bulb counter-
clockwise.
If bulbs are difficult to remove due to pro-
longed use, firmly attach a glass suction cup
(readily available at most lighting stores)
approximately the diameter of the bulb and
turn counter clockwise. You may also use a
rubber or latex glove to get the same effect.
Replacement bulbs are available at specialty
lighting stores. Purchase type GU10 120V
50W halogen bulbs.
Or to order bulbs, please call our service
center: 1-800-JENNAIR (1-800-536-6247)
OPTIONAL ACCESSORIES
Model: JXT9030CDP
Back Splash JXA9003CDP
12" Duct Cover JXA9030CDP
MAINTENANCE
bulbs could cause serious burns.
30" - 2 bulbs
36" - 3 bulbs
48" - 4 bulbs
JXT9036CDP
JXA9002CDP
JXA9036CDP
4
JXT9048CDP
JXA9001CDP
JXA9048CDP