GreenWorks Pro SN60L00 El Manual Del Propietario página 21

MAINTENANCE
REPLACING THE IMPELLER (See Figures 1-9)
1. Remove the 5 screws and
side wear pad that secure the
right side cover.
4. Remove the belt.
7. Pull the axle and remove the
old impeller. Install the new
impeller.
9. Reinstall the left side plate, large pulley, belt and left side cover.
2. Remove the nut.
5. Using a socket wrench,
remove the the large pulley.
8. Reinstall the nut and right side cover.
21
3. Remove the 5 screws and
side wear pad that secure the
left side cover.
6. Remove the screws that
secure the left side plate.