Metra 99-9605B Instrucciones De Instalación página 4

For models with factory navigation:
1. Insert the radio removal keys into the
radio until they click in, and then remove
the radio. (Figure A)
Note: The curved portion of the radio
removal keys should point towards the
middle of the radio.
2. Unsnap and remove the switch panels
from each side of the radio opening.
(Figure B)
4
DASH DISASSEMBLY
(Figure A)
(Figure B)
(CONT.)
3. Remove (6) Torx T-20 screws securing
the radio frame assembly. (Figure C)
Note: The (2) middle screws are located
deep in the dash on the sides of the
radio opening.
Continue to Kit Assembly
(Figure C)
|
1.800.221.0932 MetraOnline.com