Hoover FLOORMATE EDGE Manual De Usuario página 8

Getting started with your FloorMate
Remove and replace clean water solution tank:
WARNING
! !
To reduce the risk of personal
Injury—Unplug before cleaning
or servicing. Do not use cleaner
without tank in place.
WARNING
! !
To reduce the risk of fire and
electric shock due to internal
component damage, use only
Hoover hard floor cleaning solution
®
for use with this appliance.
5
1
Pour cleaning solution
into tank. Top up tank to
fill line with warm water
(Max 100°F).
Water will drip from the brushes and underside of the product after use and may puddle. To avoid
damage to wood and laminate flooring and to avoid potential slip hazard, after use (a) do not leave the
product on wood and laminate surfaces and move to a hard surface and (b) place unit on absorbent
®
2
Twist the tank cap to
secure.
CAUTION
!
material (such as a towel) to soak up drips.
Edge:
3
Place the bottom of the
clean water tank into the
machine first and click
the top into place.
!