Technical Information; Installation Considerations - Hansgrohe Logis 71500 1 Serie Instrucciones De Montaje

English

Technical Information

Recommended water pressure
Max. water pressure
Recommended hot water temp. 120° - 140° F*
Max. hot water temp
Flow rate - 71513xx1, 04766xx0
handshower
spout
Flow rate - 71514xx1, 04366xx0
handshower
spout
* Please know and follow all applicable local plumb-
ing codes when setting the temperature on the water
heater.

Installation Considerations

• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
• 3-hole models only: this trim kit requires
rough valve 06607000.
• The mounting surface must be finished and made
watertight before installation of this trim kit.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
2
15 - 75 PSI
145 PSI
176°F*
1.8 GPM (6.8 L/min) max.
approx. 5.6 GPM @ 44 PSI
2.0 GPM (7.6 L/min)
approx. 5.6 GPM @ 44 PSI
4-hole models only:
This trim kit requires rough valve
06646000.
• Protection against backflow is provided by a
check valve in the handshower hose and by an
automatically resetting diverter.
04366xx0
• 71514xx1,
handshower is for use with automatic
compensating valves rated at 1.7 GPM
(6.4 L/min) or less.
• 71513xx1, 04766xx0: This handshower
is for use with automatic compensating valves
rated at 1.4 GPM (5.3 L/min)or less.
• This unit is not anti-scald. In Massachusetts, or
if required by local plumbing code, install an
approved remote pressure balance valve or
other approved anti-scald device.
only:
This