Baxtran BR 15 Manual De Instrucciones página 41

5. The display will show the message "000.00h" (Superior limit=
6. Use the keys
Note: If you need to change or modify the last digit you can place the cursor on it to do it.
7. Press the key
8. The display will show the value.
DISPLAY VALUE
A
B
C
9. Press the keys
10. Press the key
8.3 AUTO SWITCH OFF|
MODES:
AoFF 00 – Auto switch off deactivated
•
AoFF 01 – Auto switch off activated in a minute. The scale is going to switch off automatically after 1 minute of not being used.
•
You can configure the value wished from 1 to 99 minutes.
•
1. Press the key
2. Press the keys
3. Press the key
8.4 DISPLAY BACKLIGHTING |
MODES:
A: Automatic.
•
ON : Illumination Activated.
•
OFF : Illumination Deactivated.
•
1. Press the key
2. Press the key
3. Press the key
8.5 HOLD FUNCTION |
(Once the object is retired from the plate, the display maintains the weight fixed during some seconds. This function is very useful for the weighing
of animals)
1. Press the key
2. Press the key
3. Press the key
40
and to move the cursor and the key
to confirm.
ESTABILITY
0 THERE IS NO NEED TO STABILIZE THE ALARM TO MAKE IT RING
1 THE ALARM MUST BE STABILIZED TO RING
0 ALWAYS 0
0 ALARM SWITCHED OFF
1 THE ALARM RING IF IT IS PLACE ON THE
BAND OK ( BETWEEN THE LIMITS LO AND
HI)
2 THE ALARM RINGS IF IT IS SITUATED
BELOW THE INFERIOR LIMIT LO OR ABOVE
THE SUPERIOR LIMIT HI
and to move the cursor and the key
to confirm.
UF-3
to have an access to the parameter.
and to move the cursor and the key
to confirm.
UF-4
to have an access to the parameter.
to select the desired mode.
to confirm.
UF-5
to access to the parameter.
to choose the desired mode.
to confirm.
Hi
)
to choose the desired number.
A B C
0 0 0
(configuration of the alarm)
LO
LO
to choose the desired number..
to choose the desired number.
USER'S MANUAL BR15
OK HI
OK HI
EN