(4.3) Usage - Snooper SPT200 Guía De Usuario

Deleting Authorised Users
a. All four authorised users are allowed to delete other users of the tracker. To
delete a user send an SMS message as follows including the user code you wish
to XXX(USER CODE):, For example, if you want to delete authorized user
SM2, then send the following SMS message SM2:, to the tracker. When the
user has been deleted, the tracker will return the followiing SMS message "Set
OK!" If the it has not been able to delete the user for any reason it will send the
following SMS message "Set Fail!".
b. If a non-authorised user tries to delete an authorised user, the tracker will send
the SMS message "You are not master!".
(4.3) General use
• When the tracker is switched on, it will automatically send an SMS message
"Power ON!" to all authorised users.
• When the battery is low, the tracker will automatically send an SMS message
"Low battery! Please charge!" to all authorised users.
(4.3.1) Locating the SPT200 Snooper Tracker
Any authorized user can locate the tracker by simply calling the
telephone number of the SIM card installed in the device using
their mobile phone. As soon as the tracker has been contacted
the call is automatically and an SMS message returned with
the geographical co-ordinates of the trackers position and the
current time
8
Snooper Tracker User Guide (9 lang).indd 8 12/11/08 17:44:11