Circulator Pump On/Off; Temperature Indication In °C Or °F - Julabo SW22 Manual De Operación

8.2. Circulator pump on/off

8.3. Temperature indication in °C or °F
Only shaking water bath SW23 feature a circulator pump.
The pump can be set to on and off at the menu level.
At working temperatures > 80° C the pump will switch off
automatically
1.
Press and
2.
Use the cursor keys
PUMP
(example: „Pu1" = Pump ON )
3.
Select the alternative state with the edit keys
confirm the selection with the ENTER key
„Pu0" = Pump OFF).
4.
Press and
The working temperature can be displayed in the MULTI-DISPLAY
(LED) in °C or °F as desired.
1.
Press and
2.
Use the cursor keys
„temperature display"
(example: „t C" = temperature display in °C).
3.
Select the alternative state with the edit keys
confirm the selection with the ENTER key
now shows „t F" = temperature display in °F.
4.
Press and
Switchover to the selected display mode takes place automatically
upon leaving the menu level.
Shaking Water Baths
at the same time.
to select the menu option
at the same time.
at the same time.
to select the menu option
at the same time.
and
(example:
and
. The display
71