Cleaning And Maintenance - Imetec F2015 Instrucciones De Uso

WARNING! This appliance is only to be used with the control
unit supplied with it. The reference of the control unit is
specified on the label sewn onto the appliance.
SWITCHING THE THROW ON AND SELECTING THE CORRECT TEMPERATURE [Fig. C]
WARNING!
or under the sheets when in use.
WARNING!
cord over the appliance.
the supply cord with the appliance.
• Turn on the throw from the back of the control unit by positioning the switch ON (I) (11).
• EXPRESS FAST PRE-HEAT - Press the Express pre-heat button on the front of the control unit
(7). The Express symbol
lovely and warm in just a few minutes.
IMPORTANT: the time required to heat the throw may vary depending on the room temperature.
To judge the temperature accurately, lie under your throw. Do not rely on a hand placed on it.
• CONTINUOUS USE - For continuous use, select the desired temperature setting between 1 and 5
by pressing the temperature selector switch (8) until the desired temperature lights up in orange on
the temperature display (5). The higher the selected number, the higher the temperature.
• If you wish to switch your throw off, simply press the timer button (6). The standby display (9) will
light up in blue.
• If you wish to switch your throw back on again, press the timer button (6) again.
MEMORY FUNCTION
After using your throw for a few minutes, the control unit will remember your last temperature setting.
AUTO SHUT-OFF FUNCTION
Your throw has an AUTOMATIC SHUT OFF TIMER.
To set the timer, press the timer button (6) and select either 1h or 9h. This will be illuminated in green
on the timer display (10).
When the set time period has elapsed, the throw will automatically switch off and the standby light will
be illuminated in blue on the standby display (9). If you wish to switch your throw back on again, press
the timer button (6) selecting either 1 or 9 hours.
DISCONNECTION
• To disconnect your throw, switch the control to OFF position (O) on the back of your control unit
(11).
Your throw is suitable for washing. Check the washing instructions on the label of your throw to wash
it correctly.
WARNING! Always disconnect the appliance from the mains
supply before cleaning or performing maintenance.
DO NOT place the control unit under the pillow
DO NOT place the control unit and the supply
will be illuminated in red on the temperature display. Your throw will be

CLEANING AND MAINTENANCE

DO NOT cover the control unit and
EN
13