Cleaning And Maintenance - Imetec N9701 Instrucciones De Uso

•
After having switched the appliance off, press the head release
button (4) and simultaneously remove the head with roller (1) from
the body of the appliance (Fig. B).
•
Insert the new head with roller (1) on the body of the appliance
(Fig. A).
•
Make sure that the head with roller (1) is inserted correctly.

CLEANING AND MAINTENANCE

ATTENTION! Switch the appliance off
before replacing the accessories.
Performance and durability are enhanced by cleaning the roller
regularly. It is recommended to clean it after every use.
ATTENTION!
appliance in water. Do not use
abrasive substances.
•
After having switched the appliance off, press the head release
button (4) and simultaneously remove the head (1) from the body
of the appliance (Fig. B).
•
Grasp the head on the sides while holding the roller downwards
and then press the roller outwards with your thumb to remove it
from its housing (Fig. C).
•
Carefully clean the roller slot and the smoothing roller (1A, 1B) with
the supplied brush (9).
•
Clean the body of the appliance with a clean, dry cloth.
•
Insert the smoothing roller once again into its slot and protect it
with the roller cover (8).
•
Store in a cool dry place.
Do not
25
place the
EN