Kodak UC102 Guia De Inicio Rapido página 3

The magnet plate sheet center point must be aligned
perfectly to both coil centers of holder and phone.
Refer to image 2.
3 - Peel o the protection sheet from the double sided tape
on the magnet plate sheet (image 3).
4 - Firmly a ix magnet plate sheet to phone case.
5 - When mounting phone onto holder, be sure that the metal
sheets perfectly align with the 4 magnets in the holder as
shown in image 4 to achieve enough magnetic strength.
Caution: It is recommended phone case with thickness
of 2mm or less be used for optimal mounting and
charging.
If the magnet plate or any foreign objects come into
contact with either coil, the charger will not work
correctly due to interference.
image 2
03
image 3